Tire size comparison
215/50R17 vs 225/45R18
Overall diameter, sidewall, revs per mile, and speedometer error — 225/45R18 is the taller tire, with a 2% speedo delta when swapping.
215/50R17
25.46in
647 mm overall diameter
225/45R18
25.97in
660 mm overall diameter
Diameter Δ
0.51 in
Speedo error
2%
215/50R17 revs/mi
792
225/45R18 revs/mi
777
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 215/50R17 | 225/45R18 |
|---|---|---|
| Section width | 215 mm | 225 mm |
| Aspect ratio | 50 | 45 |
| Wheel diameter | 17″ | 18″ |
| Sidewall height | 108 mm | 101 mm |
| Overall diameter | 25.46 in (647 mm) | 25.97 in (660 mm) |
| Circumference | 80 in | 81.59 in |
| Revolutions / mile | 792 | 777 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 215/50R17 and 225/45R18?
- 215/50R17 has an overall diameter of 25.46 inches (647 mm). 225/45R18 is 25.97 inches (660 mm). That's a 0.51 inch (13 mm) difference — 225/45R18 is taller.
- Will 225/45R18 cause speedometer error on a car fitted with 215/50R17?
- Swapping 215/50R17 for 225/45R18 produces a speedometer error of about 2%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61.2 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 215/50R17 turns 792 revs per mile. 225/45R18 turns 777 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 215/50R17 has a sidewall of 108 mm (4.23 in). 225/45R18 sidewall is 101 mm (3.99 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 225/45R18 a safe plus-size upgrade from 215/50R17?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 2%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools