Calchy.
Tire size comparison

205/50R17 vs 215/50R17

Overall diameter, sidewall, revs per mile, and speedometer error — 215/50R17 is the taller tire, with a 1.6% speedo delta when swapping.

205/50R17
25.07in
637 mm overall diameter
215/50R17
25.46in
647 mm overall diameter
Diameter Δ
0.39 in
Speedo error
1.6%
205/50R17 revs/mi
804
215/50R17 revs/mi
792

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

205/50R17Ø 25.07215/50R17Ø 25.46
Full spec

Side by side

Metric205/50R17215/50R17
Section width205 mm215 mm
Aspect ratio5050
Wheel diameter1717
Sidewall height103 mm108 mm
Overall diameter25.07 in (637 mm)25.46 in (647 mm)
Circumference78.76 in80 in
Revolutions / mile804792
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 205/50R17 and 215/50R17?
205/50R17 has an overall diameter of 25.07 inches (637 mm). 215/50R17 is 25.46 inches (647 mm). That's a 0.39 inch (10 mm) difference — 215/50R17 is taller.
Will 215/50R17 cause speedometer error on a car fitted with 205/50R17?
Swapping 205/50R17 for 215/50R17 produces a speedometer error of about 1.6%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.9 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
205/50R17 turns 804 revs per mile. 215/50R17 turns 792 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
205/50R17 has a sidewall of 103 mm (4.04 in). 215/50R17 sidewall is 108 mm (4.23 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 215/50R17 a safe plus-size upgrade from 205/50R17?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.6%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools