Calchy.
Tire size comparison

205/55R16 vs 215/50R17

Overall diameter, sidewall, revs per mile, and speedometer error — 215/50R17 is the taller tire, with a 2.4% speedo delta when swapping.

205/55R16
24.88in
632 mm overall diameter
215/50R17
25.46in
647 mm overall diameter
Diameter Δ
0.59 in
Speedo error
2.4%
205/55R16 revs/mi
811
215/50R17 revs/mi
792

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

205/55R16Ø 24.88215/50R17Ø 25.46
Full spec

Side by side

Metric205/55R16215/50R17
Section width205 mm215 mm
Aspect ratio5550
Wheel diameter1617
Sidewall height113 mm108 mm
Overall diameter24.88 in (632 mm)25.46 in (647 mm)
Circumference78.16 in80 in
Revolutions / mile811792
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 205/55R16 and 215/50R17?
205/55R16 has an overall diameter of 24.88 inches (632 mm). 215/50R17 is 25.46 inches (647 mm). That's a 0.59 inch (15 mm) difference — 215/50R17 is taller.
Will 215/50R17 cause speedometer error on a car fitted with 205/55R16?
Swapping 205/55R16 for 215/50R17 produces a speedometer error of about 2.4%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61.4 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
205/55R16 turns 811 revs per mile. 215/50R17 turns 792 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
205/55R16 has a sidewall of 113 mm (4.44 in). 215/50R17 sidewall is 108 mm (4.23 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 215/50R17 a safe plus-size upgrade from 205/55R16?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 2.4%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools