Calchy.
Tire size comparison

215/50R17 vs 225/50R17

Overall diameter, sidewall, revs per mile, and speedometer error — 225/50R17 is the taller tire, with a 1.5% speedo delta when swapping.

215/50R17
25.46in
647 mm overall diameter
225/50R17
25.86in
657 mm overall diameter
Diameter Δ
0.39 in
Speedo error
1.5%
215/50R17 revs/mi
792
225/50R17 revs/mi
780

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

215/50R17Ø 25.46225/50R17Ø 25.86
Full spec

Side by side

Metric215/50R17225/50R17
Section width215 mm225 mm
Aspect ratio5050
Wheel diameter1717
Sidewall height108 mm113 mm
Overall diameter25.46 in (647 mm)25.86 in (657 mm)
Circumference80 in81.24 in
Revolutions / mile792780
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 215/50R17 and 225/50R17?
215/50R17 has an overall diameter of 25.46 inches (647 mm). 225/50R17 is 25.86 inches (657 mm). That's a 0.39 inch (10 mm) difference — 225/50R17 is taller.
Will 225/50R17 cause speedometer error on a car fitted with 215/50R17?
Swapping 215/50R17 for 225/50R17 produces a speedometer error of about 1.5%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.9 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
215/50R17 turns 792 revs per mile. 225/50R17 turns 780 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
215/50R17 has a sidewall of 108 mm (4.23 in). 225/50R17 sidewall is 113 mm (4.43 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 225/50R17 a safe plus-size upgrade from 215/50R17?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.5%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools