Tire size comparison
265/35R18 vs 265/30R19
Overall diameter, sidewall, revs per mile, and speedometer error — 265/35R18 is the taller tire, with a 0.2% speedo delta when swapping.
265/35R18
25.3in
643 mm overall diameter
265/30R19
25.26in
642 mm overall diameter
Diameter Δ
0.04 in
Speedo error
0.2%
265/35R18 revs/mi
797
265/30R19 revs/mi
798
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 265/35R18 | 265/30R19 |
|---|---|---|
| Section width | 265 mm | 265 mm |
| Aspect ratio | 35 | 30 |
| Wheel diameter | 18″ | 19″ |
| Sidewall height | 93 mm | 80 mm |
| Overall diameter | 25.3 in (643 mm) | 25.26 in (642 mm) |
| Circumference | 79.49 in | 79.36 in |
| Revolutions / mile | 797 | 798 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 265/35R18 and 265/30R19?
- 265/35R18 has an overall diameter of 25.3 inches (643 mm). 265/30R19 is 25.26 inches (642 mm). That's a 0.04 inch (1 mm) difference — 265/30R19 is shorter.
- Will 265/30R19 cause speedometer error on a car fitted with 265/35R18?
- Swapping 265/35R18 for 265/30R19 produces a speedometer error of about 0.2%. Your speedometer will read higher than your actual speed — a 60 mph indicated reading is really 59.9 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 265/35R18 turns 797 revs per mile. 265/30R19 turns 798 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 265/35R18 has a sidewall of 93 mm (3.65 in). 265/30R19 sidewall is 80 mm (3.13 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 265/30R19 a safe plus-size upgrade from 265/35R18?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.2%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools