Tire size comparison
265/35R18 vs 275/35R18
Overall diameter, sidewall, revs per mile, and speedometer error — 275/35R18 is the taller tire, with a 1.1% speedo delta when swapping.
265/35R18
25.3in
643 mm overall diameter
275/35R18
25.58in
650 mm overall diameter
Diameter Δ
0.28 in
Speedo error
1.1%
265/35R18 revs/mi
797
275/35R18 revs/mi
788
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 265/35R18 | 275/35R18 |
|---|---|---|
| Section width | 265 mm | 275 mm |
| Aspect ratio | 35 | 35 |
| Wheel diameter | 18″ | 18″ |
| Sidewall height | 93 mm | 96 mm |
| Overall diameter | 25.3 in (643 mm) | 25.58 in (650 mm) |
| Circumference | 79.49 in | 80.36 in |
| Revolutions / mile | 797 | 788 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 265/35R18 and 275/35R18?
- 265/35R18 has an overall diameter of 25.3 inches (643 mm). 275/35R18 is 25.58 inches (650 mm). That's a 0.28 inch (7 mm) difference — 275/35R18 is taller.
- Will 275/35R18 cause speedometer error on a car fitted with 265/35R18?
- Swapping 265/35R18 for 275/35R18 produces a speedometer error of about 1.1%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.7 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 265/35R18 turns 797 revs per mile. 275/35R18 turns 788 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 265/35R18 has a sidewall of 93 mm (3.65 in). 275/35R18 sidewall is 96 mm (3.79 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 275/35R18 a safe plus-size upgrade from 265/35R18?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.1%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools