Tire size comparison
265/35R18 vs 275/30R19
Overall diameter, sidewall, revs per mile, and speedometer error — 275/30R19 is the taller tire, with a 0.8% speedo delta when swapping.
265/35R18
25.3in
643 mm overall diameter
275/30R19
25.5in
648 mm overall diameter
Diameter Δ
0.19 in
Speedo error
0.8%
265/35R18 revs/mi
797
275/30R19 revs/mi
791
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 265/35R18 | 275/30R19 |
|---|---|---|
| Section width | 265 mm | 275 mm |
| Aspect ratio | 35 | 30 |
| Wheel diameter | 18″ | 19″ |
| Sidewall height | 93 mm | 83 mm |
| Overall diameter | 25.3 in (643 mm) | 25.5 in (648 mm) |
| Circumference | 79.49 in | 80.1 in |
| Revolutions / mile | 797 | 791 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 265/35R18 and 275/30R19?
- 265/35R18 has an overall diameter of 25.3 inches (643 mm). 275/30R19 is 25.5 inches (648 mm). That's a 0.19 inch (5 mm) difference — 275/30R19 is taller.
- Will 275/30R19 cause speedometer error on a car fitted with 265/35R18?
- Swapping 265/35R18 for 275/30R19 produces a speedometer error of about 0.8%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.5 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 265/35R18 turns 797 revs per mile. 275/30R19 turns 791 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 265/35R18 has a sidewall of 93 mm (3.65 in). 275/30R19 sidewall is 83 mm (3.25 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 275/30R19 a safe plus-size upgrade from 265/35R18?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.8%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools