Calchy.
Tire size comparison

265/35R21 vs 275/35R21

Overall diameter, sidewall, revs per mile, and speedometer error — 275/35R21 is the taller tire, with a 1% speedo delta when swapping.

265/35R21
28.3in
719 mm overall diameter
275/35R21
28.58in
726 mm overall diameter
Diameter Δ
0.28 in
Speedo error
1%
265/35R21 revs/mi
713
275/35R21 revs/mi
706

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

265/35R21Ø 28.30275/35R21Ø 28.58
Full spec

Side by side

Metric265/35R21275/35R21
Section width265 mm275 mm
Aspect ratio3535
Wheel diameter2121
Sidewall height93 mm96 mm
Overall diameter28.3 in (719 mm)28.58 in (726 mm)
Circumference88.92 in89.78 in
Revolutions / mile713706
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 265/35R21 and 275/35R21?
265/35R21 has an overall diameter of 28.3 inches (719 mm). 275/35R21 is 28.58 inches (726 mm). That's a 0.28 inch (7 mm) difference — 275/35R21 is taller.
Will 275/35R21 cause speedometer error on a car fitted with 265/35R21?
Swapping 265/35R21 for 275/35R21 produces a speedometer error of about 1%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.6 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
265/35R21 turns 713 revs per mile. 275/35R21 turns 706 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
265/35R21 has a sidewall of 93 mm (3.65 in). 275/35R21 sidewall is 96 mm (3.79 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 275/35R21 a safe plus-size upgrade from 265/35R21?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools