Tire size comparison
245/45R18 vs 245/40R19
Overall diameter, sidewall, revs per mile, and speedometer error — 245/40R19 is the taller tire, with a 0.1% speedo delta when swapping.
245/45R18
26.68in
678 mm overall diameter
245/40R19
26.72in
679 mm overall diameter
Diameter Δ
0.04 in
Speedo error
0.1%
245/45R18 revs/mi
756
245/40R19 revs/mi
755
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 245/45R18 | 245/40R19 |
|---|---|---|
| Section width | 245 mm | 245 mm |
| Aspect ratio | 45 | 40 |
| Wheel diameter | 18″ | 19″ |
| Sidewall height | 110 mm | 98 mm |
| Overall diameter | 26.68 in (678 mm) | 26.72 in (679 mm) |
| Circumference | 83.82 in | 83.93 in |
| Revolutions / mile | 756 | 755 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 245/45R18 and 245/40R19?
- 245/45R18 has an overall diameter of 26.68 inches (678 mm). 245/40R19 is 26.72 inches (679 mm). That's a 0.04 inch (1 mm) difference — 245/40R19 is taller.
- Will 245/40R19 cause speedometer error on a car fitted with 245/45R18?
- Swapping 245/45R18 for 245/40R19 produces a speedometer error of about 0.1%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.1 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 245/45R18 turns 756 revs per mile. 245/40R19 turns 755 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 245/45R18 has a sidewall of 110 mm (4.34 in). 245/40R19 sidewall is 98 mm (3.86 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 245/40R19 a safe plus-size upgrade from 245/45R18?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.1%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools