Tire size comparison
235/35R19 vs 255/35R19
Overall diameter, sidewall, revs per mile, and speedometer error — 255/35R19 is the taller tire, with a 2.2% speedo delta when swapping.
235/35R19
25.48in
647 mm overall diameter
255/35R19
26.03in
661 mm overall diameter
Diameter Δ
0.55 in
Speedo error
2.2%
235/35R19 revs/mi
792
255/35R19 revs/mi
775
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 235/35R19 | 255/35R19 |
|---|---|---|
| Section width | 235 mm | 255 mm |
| Aspect ratio | 35 | 35 |
| Wheel diameter | 19″ | 19″ |
| Sidewall height | 82 mm | 89 mm |
| Overall diameter | 25.48 in (647 mm) | 26.03 in (661 mm) |
| Circumference | 80.04 in | 81.77 in |
| Revolutions / mile | 792 | 775 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 235/35R19 and 255/35R19?
- 235/35R19 has an overall diameter of 25.48 inches (647 mm). 255/35R19 is 26.03 inches (661 mm). That's a 0.55 inch (14 mm) difference — 255/35R19 is taller.
- Will 255/35R19 cause speedometer error on a car fitted with 235/35R19?
- Swapping 235/35R19 for 255/35R19 produces a speedometer error of about 2.2%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61.3 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 235/35R19 turns 792 revs per mile. 255/35R19 turns 775 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 235/35R19 has a sidewall of 82 mm (3.24 in). 255/35R19 sidewall is 89 mm (3.51 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 255/35R19 a safe plus-size upgrade from 235/35R19?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 2.2%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools