Tire size comparison
235/35R19 vs 245/35R19
Overall diameter, sidewall, revs per mile, and speedometer error — 245/35R19 is the taller tire, with a 1.1% speedo delta when swapping.
235/35R19
25.48in
647 mm overall diameter
245/35R19
25.75in
654 mm overall diameter
Diameter Δ
0.28 in
Speedo error
1.1%
235/35R19 revs/mi
792
245/35R19 revs/mi
783
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 235/35R19 | 245/35R19 |
|---|---|---|
| Section width | 235 mm | 245 mm |
| Aspect ratio | 35 | 35 |
| Wheel diameter | 19″ | 19″ |
| Sidewall height | 82 mm | 86 mm |
| Overall diameter | 25.48 in (647 mm) | 25.75 in (654 mm) |
| Circumference | 80.04 in | 80.9 in |
| Revolutions / mile | 792 | 783 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 235/35R19 and 245/35R19?
- 235/35R19 has an overall diameter of 25.48 inches (647 mm). 245/35R19 is 25.75 inches (654 mm). That's a 0.28 inch (7 mm) difference — 245/35R19 is taller.
- Will 245/35R19 cause speedometer error on a car fitted with 235/35R19?
- Swapping 235/35R19 for 245/35R19 produces a speedometer error of about 1.1%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.6 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 235/35R19 turns 792 revs per mile. 245/35R19 turns 783 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 235/35R19 has a sidewall of 82 mm (3.24 in). 245/35R19 sidewall is 86 mm (3.38 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 245/35R19 a safe plus-size upgrade from 235/35R19?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.1%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools