Tire size comparison
295/35R21 vs 305/30R22
Overall diameter, sidewall, revs per mile, and speedometer error — 305/30R22 is the taller tire, with a 0.3% speedo delta when swapping.
295/35R21
29.13in
740 mm overall diameter
305/30R22
29.2in
742 mm overall diameter
Diameter Δ
0.07 in
Speedo error
0.3%
295/35R21 revs/mi
692
305/30R22 revs/mi
691
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 295/35R21 | 305/30R22 |
|---|---|---|
| Section width | 295 mm | 305 mm |
| Aspect ratio | 35 | 30 |
| Wheel diameter | 21″ | 22″ |
| Sidewall height | 103 mm | 92 mm |
| Overall diameter | 29.13 in (740 mm) | 29.2 in (742 mm) |
| Circumference | 91.51 in | 91.75 in |
| Revolutions / mile | 692 | 691 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 295/35R21 and 305/30R22?
- 295/35R21 has an overall diameter of 29.13 inches (740 mm). 305/30R22 is 29.2 inches (742 mm). That's a 0.07 inch (2 mm) difference — 305/30R22 is taller.
- Will 305/30R22 cause speedometer error on a car fitted with 295/35R21?
- Swapping 295/35R21 for 305/30R22 produces a speedometer error of about 0.3%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.2 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 295/35R21 turns 692 revs per mile. 305/30R22 turns 691 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 295/35R21 has a sidewall of 103 mm (4.06 in). 305/30R22 sidewall is 92 mm (3.6 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 305/30R22 a safe plus-size upgrade from 295/35R21?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.3%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools