Tire size comparison
295/30R22 vs 315/30R22
Overall diameter, sidewall, revs per mile, and speedometer error — 315/30R22 is the taller tire, with a 1.6% speedo delta when swapping.
295/30R22
28.97in
736 mm overall diameter
315/30R22
29.44in
748 mm overall diameter
Diameter Δ
0.47 in
Speedo error
1.6%
295/30R22 revs/mi
696
315/30R22 revs/mi
685
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 295/30R22 | 315/30R22 |
|---|---|---|
| Section width | 295 mm | 315 mm |
| Aspect ratio | 30 | 30 |
| Wheel diameter | 22″ | 22″ |
| Sidewall height | 89 mm | 95 mm |
| Overall diameter | 28.97 in (736 mm) | 29.44 in (748 mm) |
| Circumference | 91.01 in | 92.49 in |
| Revolutions / mile | 696 | 685 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 295/30R22 and 315/30R22?
- 295/30R22 has an overall diameter of 28.97 inches (736 mm). 315/30R22 is 29.44 inches (748 mm). That's a 0.47 inch (12 mm) difference — 315/30R22 is taller.
- Will 315/30R22 cause speedometer error on a car fitted with 295/30R22?
- Swapping 295/30R22 for 315/30R22 produces a speedometer error of about 1.6%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 295/30R22 turns 696 revs per mile. 315/30R22 turns 685 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 295/30R22 has a sidewall of 89 mm (3.48 in). 315/30R22 sidewall is 95 mm (3.72 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 315/30R22 a safe plus-size upgrade from 295/30R22?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.6%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools