Tire size comparison
295/30R21 vs 315/30R21
Overall diameter, sidewall, revs per mile, and speedometer error — 315/30R21 is the taller tire, with a 1.7% speedo delta when swapping.
295/30R21
27.97in
710 mm overall diameter
315/30R21
28.44in
722 mm overall diameter
Diameter Δ
0.47 in
Speedo error
1.7%
295/30R21 revs/mi
721
315/30R21 revs/mi
709
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 295/30R21 | 315/30R21 |
|---|---|---|
| Section width | 295 mm | 315 mm |
| Aspect ratio | 30 | 30 |
| Wheel diameter | 21″ | 21″ |
| Sidewall height | 89 mm | 95 mm |
| Overall diameter | 27.97 in (710 mm) | 28.44 in (722 mm) |
| Circumference | 87.87 in | 89.35 in |
| Revolutions / mile | 721 | 709 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 295/30R21 and 315/30R21?
- 295/30R21 has an overall diameter of 27.97 inches (710 mm). 315/30R21 is 28.44 inches (722 mm). That's a 0.47 inch (12 mm) difference — 315/30R21 is taller.
- Will 315/30R21 cause speedometer error on a car fitted with 295/30R21?
- Swapping 295/30R21 for 315/30R21 produces a speedometer error of about 1.7%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 295/30R21 turns 721 revs per mile. 315/30R21 turns 709 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 295/30R21 has a sidewall of 89 mm (3.48 in). 315/30R21 sidewall is 95 mm (3.72 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 315/30R21 a safe plus-size upgrade from 295/30R21?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.7%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools