Tire size comparison
305/30R21 vs 315/30R21
Overall diameter, sidewall, revs per mile, and speedometer error — 315/30R21 is the taller tire, with a 0.8% speedo delta when swapping.
305/30R21
28.2in
716 mm overall diameter
315/30R21
28.44in
722 mm overall diameter
Diameter Δ
0.24 in
Speedo error
0.8%
305/30R21 revs/mi
715
315/30R21 revs/mi
709
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 305/30R21 | 315/30R21 |
|---|---|---|
| Section width | 305 mm | 315 mm |
| Aspect ratio | 30 | 30 |
| Wheel diameter | 21″ | 21″ |
| Sidewall height | 92 mm | 95 mm |
| Overall diameter | 28.2 in (716 mm) | 28.44 in (722 mm) |
| Circumference | 88.61 in | 89.35 in |
| Revolutions / mile | 715 | 709 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 305/30R21 and 315/30R21?
- 305/30R21 has an overall diameter of 28.2 inches (716 mm). 315/30R21 is 28.44 inches (722 mm). That's a 0.24 inch (6 mm) difference — 315/30R21 is taller.
- Will 315/30R21 cause speedometer error on a car fitted with 305/30R21?
- Swapping 305/30R21 for 315/30R21 produces a speedometer error of about 0.8%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.5 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 305/30R21 turns 715 revs per mile. 315/30R21 turns 709 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 305/30R21 has a sidewall of 92 mm (3.6 in). 315/30R21 sidewall is 95 mm (3.72 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 315/30R21 a safe plus-size upgrade from 305/30R21?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.8%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools