Tire size comparison
275/35R19 vs 275/30R20
Overall diameter, sidewall, revs per mile, and speedometer error — 275/35R19 is the taller tire, with a 0.3% speedo delta when swapping.
275/35R19
26.58in
675 mm overall diameter
275/30R20
26.5in
673 mm overall diameter
Diameter Δ
0.08 in
Speedo error
0.3%
275/35R19 revs/mi
759
275/30R20 revs/mi
761
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 275/35R19 | 275/30R20 |
|---|---|---|
| Section width | 275 mm | 275 mm |
| Aspect ratio | 35 | 30 |
| Wheel diameter | 19″ | 20″ |
| Sidewall height | 96 mm | 83 mm |
| Overall diameter | 26.58 in (675 mm) | 26.5 in (673 mm) |
| Circumference | 83.5 in | 83.24 in |
| Revolutions / mile | 759 | 761 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 275/35R19 and 275/30R20?
- 275/35R19 has an overall diameter of 26.58 inches (675 mm). 275/30R20 is 26.5 inches (673 mm). That's a 0.08 inch (2 mm) difference — 275/30R20 is shorter.
- Will 275/30R20 cause speedometer error on a car fitted with 275/35R19?
- Swapping 275/35R19 for 275/30R20 produces a speedometer error of about 0.3%. Your speedometer will read higher than your actual speed — a 60 mph indicated reading is really 59.8 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 275/35R19 turns 759 revs per mile. 275/30R20 turns 761 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 275/35R19 has a sidewall of 96 mm (3.79 in). 275/30R20 sidewall is 83 mm (3.25 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 275/30R20 a safe plus-size upgrade from 275/35R19?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.3%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools