Tire size comparison
275/30R21 vs 285/30R21
Overall diameter, sidewall, revs per mile, and speedometer error — 285/30R21 is the taller tire, with a 0.9% speedo delta when swapping.
275/30R21
27.5in
698 mm overall diameter
285/30R21
27.73in
704 mm overall diameter
Diameter Δ
0.24 in
Speedo error
0.9%
275/30R21 revs/mi
733
285/30R21 revs/mi
727
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 275/30R21 | 285/30R21 |
|---|---|---|
| Section width | 275 mm | 285 mm |
| Aspect ratio | 30 | 30 |
| Wheel diameter | 21″ | 21″ |
| Sidewall height | 83 mm | 86 mm |
| Overall diameter | 27.5 in (698 mm) | 27.73 in (704 mm) |
| Circumference | 86.38 in | 87.12 in |
| Revolutions / mile | 733 | 727 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 275/30R21 and 285/30R21?
- 275/30R21 has an overall diameter of 27.5 inches (698 mm). 285/30R21 is 27.73 inches (704 mm). That's a 0.24 inch (6 mm) difference — 285/30R21 is taller.
- Will 285/30R21 cause speedometer error on a car fitted with 275/30R21?
- Swapping 275/30R21 for 285/30R21 produces a speedometer error of about 0.9%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.5 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 275/30R21 turns 733 revs per mile. 285/30R21 turns 727 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 275/30R21 has a sidewall of 83 mm (3.25 in). 285/30R21 sidewall is 86 mm (3.37 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 285/30R21 a safe plus-size upgrade from 275/30R21?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.9%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools