Tire size comparison
245/35R19 vs 255/30R20
Overall diameter, sidewall, revs per mile, and speedometer error — 255/30R20 is the taller tire, with a 1.1% speedo delta when swapping.
245/35R19
25.75in
654 mm overall diameter
255/30R20
26.02in
661 mm overall diameter
Diameter Δ
0.27 in
Speedo error
1.1%
245/35R19 revs/mi
783
255/30R20 revs/mi
775
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 245/35R19 | 255/30R20 |
|---|---|---|
| Section width | 245 mm | 255 mm |
| Aspect ratio | 35 | 30 |
| Wheel diameter | 19″ | 20″ |
| Sidewall height | 86 mm | 77 mm |
| Overall diameter | 25.75 in (654 mm) | 26.02 in (661 mm) |
| Circumference | 80.9 in | 81.76 in |
| Revolutions / mile | 783 | 775 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 245/35R19 and 255/30R20?
- 245/35R19 has an overall diameter of 25.75 inches (654 mm). 255/30R20 is 26.02 inches (661 mm). That's a 0.27 inch (7 mm) difference — 255/30R20 is taller.
- Will 255/30R20 cause speedometer error on a car fitted with 245/35R19?
- Swapping 245/35R19 for 255/30R20 produces a speedometer error of about 1.1%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.6 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 245/35R19 turns 783 revs per mile. 255/30R20 turns 775 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 245/35R19 has a sidewall of 86 mm (3.38 in). 255/30R20 sidewall is 77 mm (3.01 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 255/30R20 a safe plus-size upgrade from 245/35R19?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.1%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools