Calchy.
Tire size comparison

225/45R17 vs 245/45R17

Overall diameter, sidewall, revs per mile, and speedometer error — 245/45R17 is the taller tire, with a 2.8% speedo delta when swapping.

225/45R17
24.97in
634 mm overall diameter
245/45R17
25.68in
652 mm overall diameter
Diameter Δ
0.71 in
Speedo error
2.8%
225/45R17 revs/mi
808
245/45R17 revs/mi
785

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

225/45R17Ø 24.97245/45R17Ø 25.68
Full spec

Side by side

Metric225/45R17245/45R17
Section width225 mm245 mm
Aspect ratio4545
Wheel diameter1717
Sidewall height101 mm110 mm
Overall diameter24.97 in (634 mm)25.68 in (652 mm)
Circumference78.45 in80.68 in
Revolutions / mile808785
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 225/45R17 and 245/45R17?
225/45R17 has an overall diameter of 24.97 inches (634 mm). 245/45R17 is 25.68 inches (652 mm). That's a 0.71 inch (18 mm) difference — 245/45R17 is taller.
Will 245/45R17 cause speedometer error on a car fitted with 225/45R17?
Swapping 225/45R17 for 245/45R17 produces a speedometer error of about 2.8%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61.7 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
225/45R17 turns 808 revs per mile. 245/45R17 turns 785 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
225/45R17 has a sidewall of 101 mm (3.99 in). 245/45R17 sidewall is 110 mm (4.34 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 245/45R17 a safe plus-size upgrade from 225/45R17?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 2.8%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools