Tire size comparison
275/30R20 vs 285/30R20
Overall diameter, sidewall, revs per mile, and speedometer error — 285/30R20 is the taller tire, with a 0.9% speedo delta when swapping.
275/30R20
26.5in
673 mm overall diameter
285/30R20
26.73in
679 mm overall diameter
Diameter Δ
0.24 in
Speedo error
0.9%
275/30R20 revs/mi
761
285/30R20 revs/mi
754
Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.
Full spec
Side by side
| Metric | 275/30R20 | 285/30R20 |
|---|---|---|
| Section width | 275 mm | 285 mm |
| Aspect ratio | 30 | 30 |
| Wheel diameter | 20″ | 20″ |
| Sidewall height | 83 mm | 86 mm |
| Overall diameter | 26.5 in (673 mm) | 26.73 in (679 mm) |
| Circumference | 83.24 in | 83.98 in |
| Revolutions / mile | 761 | 754 |
Related
Other comparisons for these sizes
FAQ
Frequently asked
- What is the diameter difference between 275/30R20 and 285/30R20?
- 275/30R20 has an overall diameter of 26.5 inches (673 mm). 285/30R20 is 26.73 inches (679 mm). That's a 0.24 inch (6 mm) difference — 285/30R20 is taller.
- Will 285/30R20 cause speedometer error on a car fitted with 275/30R20?
- Swapping 275/30R20 for 285/30R20 produces a speedometer error of about 0.9%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 60.5 mph. Anything under 3% is usually acceptable without recalibration.
- How many revolutions per mile does each size do?
- 275/30R20 turns 761 revs per mile. 285/30R20 turns 754 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
- What's the sidewall height difference?
- 275/30R20 has a sidewall of 83 mm (3.25 in). 285/30R20 sidewall is 86 mm (3.37 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
- Is 285/30R20 a safe plus-size upgrade from 275/30R20?
- A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 0.9%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools