Calchy.
Tire size comparison

245/45R19 vs 255/40R19

Overall diameter, sidewall, revs per mile, and speedometer error — 245/45R19 is the taller tire, with a 2.3% speedo delta when swapping.

245/45R19
27.68in
703 mm overall diameter
255/40R19
27.03in
687 mm overall diameter
Diameter Δ
0.65 in
Speedo error
2.3%
245/45R19 revs/mi
729
255/40R19 revs/mi
746

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

245/45R19Ø 27.68255/40R19Ø 27.03
Full spec

Side by side

Metric245/45R19255/40R19
Section width245 mm255 mm
Aspect ratio4540
Wheel diameter1919
Sidewall height110 mm102 mm
Overall diameter27.68 in (703 mm)27.03 in (687 mm)
Circumference86.96 in84.92 in
Revolutions / mile729746
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 245/45R19 and 255/40R19?
245/45R19 has an overall diameter of 27.68 inches (703 mm). 255/40R19 is 27.03 inches (687 mm). That's a 0.65 inch (17 mm) difference — 255/40R19 is shorter.
Will 255/40R19 cause speedometer error on a car fitted with 245/45R19?
Swapping 245/45R19 for 255/40R19 produces a speedometer error of about 2.3%. Your speedometer will read higher than your actual speed — a 60 mph indicated reading is really 58.6 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
245/45R19 turns 729 revs per mile. 255/40R19 turns 746 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
245/45R19 has a sidewall of 110 mm (4.34 in). 255/40R19 sidewall is 102 mm (4.02 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 255/40R19 a safe plus-size upgrade from 245/45R19?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 2.3%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools