Calchy.
Tire size comparison

205/60R16 vs 215/60R16

Overall diameter, sidewall, revs per mile, and speedometer error — 215/60R16 is the taller tire, with a 1.8% speedo delta when swapping.

205/60R16
25.69in
652 mm overall diameter
215/60R16
26.16in
664 mm overall diameter
Diameter Δ
0.47 in
Speedo error
1.8%
205/60R16 revs/mi
785
215/60R16 revs/mi
771

Within the ±3% overall-diameter band usually considered safe for plus-sizing — speedometer and ABS calibration should stay close to factory.

205/60R16Ø 25.69215/60R16Ø 26.16
Full spec

Side by side

Metric205/60R16215/60R16
Section width205 mm215 mm
Aspect ratio6060
Wheel diameter1616
Sidewall height123 mm129 mm
Overall diameter25.69 in (652 mm)26.16 in (664 mm)
Circumference80.69 in82.18 in
Revolutions / mile785771
Related

Other comparisons for these sizes

FAQ

Frequently asked

What is the diameter difference between 205/60R16 and 215/60R16?
205/60R16 has an overall diameter of 25.69 inches (652 mm). 215/60R16 is 26.16 inches (664 mm). That's a 0.47 inch (12 mm) difference — 215/60R16 is taller.
Will 215/60R16 cause speedometer error on a car fitted with 205/60R16?
Swapping 205/60R16 for 215/60R16 produces a speedometer error of about 1.8%. Your speedometer will read lower than your actual speed — a 60 mph indicated reading is really 61.1 mph. Anything under 3% is usually acceptable without recalibration.
How many revolutions per mile does each size do?
205/60R16 turns 785 revs per mile. 215/60R16 turns 771 revs per mile. Taller tyres turn fewer times per mile, which lowers effective final-drive ratio.
What's the sidewall height difference?
205/60R16 has a sidewall of 123 mm (4.84 in). 215/60R16 sidewall is 129 mm (5.08 in). Lower-profile sidewalls give sharper steering response but less bump compliance.
Is 215/60R16 a safe plus-size upgrade from 205/60R16?
A plus-size upgrade is considered safe when overall diameter stays within ±3% — here the difference is 1.8%. This swap is within the typical safe range; speedometer and ABS calibration should remain close to factory.
Related tools