What is the recommended tire pressure for a 2016 Toyota Sienna?

The 2016 Toyota Sienna uses 35 PSI cold on the front axle and 35 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.

What tire size does the 2016 Toyota Sienna use?

The standard (base trim) tire size for the 2016 Toyota Sienna is 235/60R18. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.

How do I convert the 2016 Toyota Sienna tire pressure to bar?

35 PSI = 2.4 bar (front) and 35 PSI = 2.4 bar (rear). In kPa: 241 kPa front and 241 kPa rear. Multiply PSI × 0.0689 to convert to bar.

Why are the front and rear tire pressures the same on the 2016 Toyota Sienna?

The 2016 Toyota Sienna uses equal pressure front and rear (35 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.

What happens if the 2016 Toyota Sienna tires are underinflated?

Running 5+ PSI low on the Toyota Sienna causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.

What do the numbers in 235/60R18 mean on the 2016 Toyota Sienna?

On the 2016 Toyota Sienna, 235/60R18 breaks down as: 235 = section width in millimetres (9.25"), 60 = aspect ratio (the sidewall is 60% of the width, so 141 mm / 5.55" tall), R = radial construction, and 18 = the wheel diameter in inches.

What is the overall diameter of the 2016 Toyota Sienna tires?

The 235/60R18 tire on the 2016 Toyota Sienna has an overall diameter of about 29.1" (739 mm) and a rolling circumference of roughly 91.43", giving about 693 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.

2016 Toyota Sienna Tire Pressure

OEM cold pressure spec — verified for the 2015–2020 generation.

Recommended cold pressure

Front

35PSI

241 kPa

Rear

35PSI

241 kPa

Tire size

235/60R18

Curb weight

2,065 kg

Front axle

57%

2016 Toyota Sienna tire size: 235/60R18

The factory (base-trim) tire size for the 2016 Toyota Sienna is 235/60R18. Here is what that size measures out to in the real world — useful when comparing replacement tires or checking whether a different size will fit.

Section width

235 mm

9.25"

Aspect ratio

60%

141 mm sidewall

Wheel diameter

18"

rim

Overall diameter: 29.1"; 739 mm
Sidewall height: 5.55"; 141 mm
Circumference: 91.43"; rolling
Revs / mile: 693; approx.

Staying within ±3% of the 29.1" overall diameter keeps your speedometer accurate. A larger diameter reads slower than your true speed; a smaller one reads faster.

Custom adjustment

Tune for your load & driving style

Pre-filled with Toyota Sienna specs. Adjust weight or style below.

Recommended COLD pressure

26.4 / 22 PSI

Front (cold): 26.4 PSI(1.82 bar)
Rear (cold): 22 PSI(1.52 bar)
Front (hot est.): 29.1 PSI
Rear (hot est.): 24.2 PSI

Street setting: balanced for comfort, wear, and fuel economy. Always measure cold.

Save on coverage

Compare insurance quotes for your 2016 Toyota Sienna

See rates from multiple insurers side by side for the 2016 Toyota Sienna. Most drivers who compare switch and save.

Compare insurance quotes

Your 2016 Toyota Sienna is likely out of its factory warranty. See extended warranty options →

Calchy may be compensated when you get a quote through these partners. This is advertising, not financial advice.

Shop parts for this vehicle

Common maintenance parts that fit the 2016 Toyota Sienna. Links open an Amazon search.

As an Amazon Associate, Calchy may earn from qualifying purchases.

Other Toyota Sienna years

2019 2018 2017 2015 All years →

FAQ

2016 Toyota Sienna

What is the recommended tire pressure for a 2016 Toyota Sienna?: The 2016 Toyota Sienna uses 35 PSI cold on the front axle and 35 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.
What tire size does the 2016 Toyota Sienna use?: The standard (base trim) tire size for the 2016 Toyota Sienna is 235/60R18. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.
How do I convert the 2016 Toyota Sienna tire pressure to bar?: 35 PSI = 2.4 bar (front) and 35 PSI = 2.4 bar (rear). In kPa: 241 kPa front and 241 kPa rear. Multiply PSI × 0.0689 to convert to bar.
Why are the front and rear tire pressures the same on the 2016 Toyota Sienna?: The 2016 Toyota Sienna uses equal pressure front and rear (35 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.
What happens if the 2016 Toyota Sienna tires are underinflated?: Running 5+ PSI low on the Toyota Sienna causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.
What do the numbers in 235/60R18 mean on the 2016 Toyota Sienna?: On the 2016 Toyota Sienna, 235/60R18 breaks down as: 235 = section width in millimetres (9.25"), 60 = aspect ratio (the sidewall is 60% of the width, so 141 mm / 5.55" tall), R = radial construction, and 18 = the wheel diameter in inches.
What is the overall diameter of the 2016 Toyota Sienna tires?: The 235/60R18 tire on the 2016 Toyota Sienna has an overall diameter of about 29.1" (739 mm) and a rolling circumference of roughly 91.43", giving about 693 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.