Heavy Load / Towing
Tesla Model 3 — Heavy Load / Towing Tire Pressure
For heavy load / towing use on the Tesla Model 3, set cold pressures to 48 PSI front and 50 PSI rear.
Heavy Load / Towing cold pressure
Front
48
331 kPa
+3 vs OEM
Rear
50
345 kPa
+5 vs OEM
OEM spec
45/45 PSI
Tire size
235/40R19
Curb weight
1,636 kg
Category
ev
When loaded to GVWR or towing, increase rear PSI more than front to keep the load-carrying capacity within spec.
Community-tuned pressures based on OEM spec + typical use-case deltas. Always verify against your door-jamb sticker for your exact trim and load rating. Minimum safe pressure is 24 PSI for most passenger tires.
Other setups for this Model 3
FAQ
Frequently asked
- What tire pressure should I use for load driving in the Tesla Model 3?
- For heavy load / towing use on the Tesla Model 3, set cold pressures to 48 PSI front and 50 PSI rear. When loaded to GVWR or towing, increase rear PSI more than front to keep the load-carrying capacity within spec.
- What is the OEM tire pressure for the Tesla Model 3?
- The factory cold pressure spec for the 2017–2024 Tesla Model 3 is 45 PSI front / 45 PSI rear. Always use the door-jamb sticker for your specific trim.
- What about towing with the Tesla Model 3?
- Towing or carrying heavy loads shifts weight rearward. Using 48 PSI front / 50 PSI rear keeps load-carrying capacity within spec and prevents rear sidewall overheating.
- What is 48 PSI in bar or kPa?
- 48 PSI = 3.3 bar = 331 kPa. The rear 50 PSI = 3.4 bar.
Related tools