calchy.

2023 Mercedes-Benz GLE Tire Pressure

OEM cold pressure spec — verified for the 2020–2024 generation

Recommended cold pressure (PSI)
Front
36
2.5 bar · 248 kPa
Rear
39
2.7 bar · 269 kPa
Tire size
265/45R21
Curb weight
2,165 kg
Front axle load
53%
Category
suv

Always verify against the sticker inside your driver's door — different trims, option packages, or a spare tire may have different specifications.

Customize for your load & driving style

Pre-filled with Mercedes-Benz GLE specs. Adjust weight or style below.

Recommended COLD pressure
25.9 / 22.9 PSI
Front (cold)
25.9 PSI(1.78 bar)
Rear (cold)
22.9 PSI(1.58 bar)
Front (hot est.)
28.5 PSI
Rear (hot est.)
25.2 PSI

Street setting: balanced for comfort, wear, and fuel economy. Always measure cold.

Other Mercedes-Benz GLE years

FAQ — 2023 Mercedes-Benz GLE

What is the recommended tire pressure for a 2023 Mercedes-Benz GLE?
The 2023 Mercedes-Benz GLE uses 36 PSI cold on the front axle and 39 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.
What tire size does the 2023 Mercedes-Benz GLE use?
The standard (base trim) tire size for the 2023 Mercedes-Benz GLE is 265/45R21. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.
How do I convert the 2023 Mercedes-Benz GLE tire pressure to bar?
36 PSI = 2.5 bar (front) and 39 PSI = 2.7 bar (rear). In kPa: 248 kPa front and 269 kPa rear. Multiply PSI × 0.0689 to convert to bar.
Why are the front and rear tire pressures different on the 2023 Mercedes-Benz GLE?
The 2023 Mercedes-Benz GLE uses 36 PSI front and 39 PSI rear because the two axles carry different loads. The front axle carries roughly 53% of the vehicle's 2165 kg curb weight, requiring a slightly different pressure to maintain the correct contact patch at each corner.
What happens if the 2023 Mercedes-Benz GLE tires are underinflated?
Running 5+ PSI low on the Mercedes-Benz GLE causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.