What is the recommended tire pressure for a 2016 Mazda Mazda3?

The 2016 Mazda Mazda3 uses 33 PSI cold on the front axle and 33 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.

What tire size does the 2016 Mazda Mazda3 use?

The standard (base trim) tire size for the 2016 Mazda Mazda3 is 205/60R16. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.

How do I convert the 2016 Mazda Mazda3 tire pressure to bar?

33 PSI = 2.3 bar (front) and 33 PSI = 2.3 bar (rear). In kPa: 228 kPa front and 228 kPa rear. Multiply PSI × 0.0689 to convert to bar.

Why are the front and rear tire pressures the same on the 2016 Mazda Mazda3?

The 2016 Mazda Mazda3 uses equal pressure front and rear (33 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.

What happens if the 2016 Mazda Mazda3 tires are underinflated?

Running 5+ PSI low on the Mazda Mazda3 causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.

What do the numbers in 205/60R16 mean on the 2016 Mazda Mazda3?

On the 2016 Mazda Mazda3, 205/60R16 breaks down as: 205 = section width in millimetres (8.07"), 60 = aspect ratio (the sidewall is 60% of the width, so 123 mm / 4.84" tall), R = radial construction, and 16 = the wheel diameter in inches.

What is the overall diameter of the 2016 Mazda Mazda3 tires?

The 205/60R16 tire on the 2016 Mazda Mazda3 has an overall diameter of about 25.69" (652 mm) and a rolling circumference of roughly 80.69", giving about 785 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.

2016 Mazda Mazda3 Tire Pressure

OEM cold pressure spec — verified for the 2014–2018 generation.

Recommended cold pressure

Front

33PSI

228 kPa

Rear

33PSI

228 kPa

Tire size

205/60R16

Curb weight

1,355 kg

Front axle

62%

2016 Mazda Mazda3 tire size: 205/60R16

The factory (base-trim) tire size for the 2016 Mazda Mazda3 is 205/60R16. Here is what that size measures out to in the real world — useful when comparing replacement tires or checking whether a different size will fit.

Section width

205 mm

8.07"

Aspect ratio

60%

123 mm sidewall

Wheel diameter

16"

rim

Overall diameter: 25.69"; 652 mm
Sidewall height: 4.84"; 123 mm
Circumference: 80.69"; rolling
Revs / mile: 785; approx.

Staying within ±3% of the 25.69" overall diameter keeps your speedometer accurate. A larger diameter reads slower than your true speed; a smaller one reads faster.

Custom adjustment

Tune for your load & driving style

Pre-filled with Mazda Mazda3 specs. Adjust weight or style below.

Recommended COLD pressure

28.1 / 22 PSI

Front (cold): 28.1 PSI(1.94 bar)
Rear (cold): 22 PSI(1.52 bar)
Front (hot est.): 30.9 PSI
Rear (hot est.): 24.2 PSI

Street setting: balanced for comfort, wear, and fuel economy. Always measure cold.

Save on coverage

Compare insurance quotes for your 2016 Mazda Mazda3

See rates from multiple insurers side by side for the 2016 Mazda Mazda3. Most drivers who compare switch and save.

Compare insurance quotes

Your 2016 Mazda Mazda3 is likely out of its factory warranty. See extended warranty options →

Calchy may be compensated when you get a quote through these partners. This is advertising, not financial advice.

Shop parts for this vehicle

Common maintenance parts that fit the 2016 Mazda Mazda3. Links open an Amazon search.

As an Amazon Associate, Calchy may earn from qualifying purchases.

Other Mazda Mazda3 years

2019 2018 2017 2015 2014 All years →

FAQ

2016 Mazda Mazda3

What is the recommended tire pressure for a 2016 Mazda Mazda3?: The 2016 Mazda Mazda3 uses 33 PSI cold on the front axle and 33 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.
What tire size does the 2016 Mazda Mazda3 use?: The standard (base trim) tire size for the 2016 Mazda Mazda3 is 205/60R16. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.
How do I convert the 2016 Mazda Mazda3 tire pressure to bar?: 33 PSI = 2.3 bar (front) and 33 PSI = 2.3 bar (rear). In kPa: 228 kPa front and 228 kPa rear. Multiply PSI × 0.0689 to convert to bar.
Why are the front and rear tire pressures the same on the 2016 Mazda Mazda3?: The 2016 Mazda Mazda3 uses equal pressure front and rear (33 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.
What happens if the 2016 Mazda Mazda3 tires are underinflated?: Running 5+ PSI low on the Mazda Mazda3 causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.
What do the numbers in 205/60R16 mean on the 2016 Mazda Mazda3?: On the 2016 Mazda Mazda3, 205/60R16 breaks down as: 205 = section width in millimetres (8.07"), 60 = aspect ratio (the sidewall is 60% of the width, so 123 mm / 4.84" tall), R = radial construction, and 16 = the wheel diameter in inches.
What is the overall diameter of the 2016 Mazda Mazda3 tires?: The 205/60R16 tire on the 2016 Mazda Mazda3 has an overall diameter of about 25.69" (652 mm) and a rolling circumference of roughly 80.69", giving about 785 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.