Heavy Load / Towing
Kia Telluride — Heavy Load / Towing Tire Pressure
For heavy load / towing use on the Kia Telluride, set cold pressures to 38 PSI front and 40 PSI rear.
Heavy Load / Towing cold pressure
Front
38
262 kPa
+3 vs OEM
Rear
40
276 kPa
+5 vs OEM
OEM spec
35/35 PSI
Tire size
245/60R18
Curb weight
1,950 kg
Category
suv
When loaded to GVWR or towing, increase rear PSI more than front to keep the load-carrying capacity within spec.
Community-tuned pressures based on OEM spec + typical use-case deltas. Always verify against your door-jamb sticker for your exact trim and load rating. Minimum safe pressure is 24 PSI for most passenger tires.
Other setups for this Telluride
FAQ
Frequently asked
- What tire pressure should I use for load driving in the Kia Telluride?
- For heavy load / towing use on the Kia Telluride, set cold pressures to 38 PSI front and 40 PSI rear. When loaded to GVWR or towing, increase rear PSI more than front to keep the load-carrying capacity within spec.
- What is the OEM tire pressure for the Kia Telluride?
- The factory cold pressure spec for the 2020–2024 Kia Telluride is 35 PSI front / 35 PSI rear. Always use the door-jamb sticker for your specific trim.
- What about towing with the Kia Telluride?
- Towing or carrying heavy loads shifts weight rearward. Using 38 PSI front / 40 PSI rear keeps load-carrying capacity within spec and prevents rear sidewall overheating.
- What is 38 PSI in bar or kPa?
- 38 PSI = 2.6 bar = 262 kPa. The rear 40 PSI = 2.8 bar.
Related tools