What is the recommended tire pressure for a 2020 Hyundai Tucson?

The 2020 Hyundai Tucson uses 33 PSI cold on the front axle and 33 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.

What tire size does the 2020 Hyundai Tucson use?

The standard (base trim) tire size for the 2020 Hyundai Tucson is 235/60R17. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.

How do I convert the 2020 Hyundai Tucson tire pressure to bar?

33 PSI = 2.3 bar (front) and 33 PSI = 2.3 bar (rear). In kPa: 228 kPa front and 228 kPa rear. Multiply PSI × 0.0689 to convert to bar.

Why are the front and rear tire pressures the same on the 2020 Hyundai Tucson?

The 2020 Hyundai Tucson uses equal pressure front and rear (33 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.

What happens if the 2020 Hyundai Tucson tires are underinflated?

Running 5+ PSI low on the Hyundai Tucson causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.

What do the numbers in 235/60R17 mean on the 2020 Hyundai Tucson?

On the 2020 Hyundai Tucson, 235/60R17 breaks down as: 235 = section width in millimetres (9.25"), 60 = aspect ratio (the sidewall is 60% of the width, so 141 mm / 5.55" tall), R = radial construction, and 17 = the wheel diameter in inches.

What is the overall diameter of the 2020 Hyundai Tucson tires?

The 235/60R17 tire on the 2020 Hyundai Tucson has an overall diameter of about 28.1" (714 mm) and a rolling circumference of roughly 88.29", giving about 718 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.

2020 Hyundai Tucson Tire Pressure

OEM cold pressure spec — verified for the 2016–2021 generation.

Recommended cold pressure

Front

33PSI

228 kPa

Rear

33PSI

228 kPa

Tire size

235/60R17

Curb weight

1,580 kg

Front axle

59%

2020 Hyundai Tucson tire size: 235/60R17

The factory (base-trim) tire size for the 2020 Hyundai Tucson is 235/60R17. Here is what that size measures out to in the real world — useful when comparing replacement tires or checking whether a different size will fit.

Section width

235 mm

9.25"

Aspect ratio

60%

141 mm sidewall

Wheel diameter

17"

rim

Overall diameter: 28.1"; 714 mm
Sidewall height: 5.55"; 141 mm
Circumference: 88.29"; rolling
Revs / mile: 718; approx.

Staying within ±3% of the 28.1" overall diameter keeps your speedometer accurate. A larger diameter reads slower than your true speed; a smaller one reads faster.

Custom adjustment

Tune for your load & driving style

Pre-filled with Hyundai Tucson specs. Adjust weight or style below.

Recommended COLD pressure

22 / 22 PSI

Front (cold): 22 PSI(1.52 bar)
Rear (cold): 22 PSI(1.52 bar)
Front (hot est.): 24.2 PSI
Rear (hot est.): 24.2 PSI

Street setting: balanced for comfort, wear, and fuel economy. Always measure cold.

Save on coverage

Compare insurance quotes for your 2020 Hyundai Tucson

See rates from multiple insurers side by side for the 2020 Hyundai Tucson. Most drivers who compare switch and save.

Compare insurance quotes

Your 2020 Hyundai Tucson is likely out of its factory warranty. See extended warranty options →

Calchy may be compensated when you get a quote through these partners. This is advertising, not financial advice.

Shop parts for this vehicle

Common maintenance parts that fit the 2020 Hyundai Tucson. Links open an Amazon search.

As an Amazon Associate, Calchy may earn from qualifying purchases.

Other Hyundai Tucson years

2023 2022 2021 2019 2018 2017 All years →

FAQ

2020 Hyundai Tucson

What is the recommended tire pressure for a 2020 Hyundai Tucson?: The 2020 Hyundai Tucson uses 33 PSI cold on the front axle and 33 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.
What tire size does the 2020 Hyundai Tucson use?: The standard (base trim) tire size for the 2020 Hyundai Tucson is 235/60R17. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.
How do I convert the 2020 Hyundai Tucson tire pressure to bar?: 33 PSI = 2.3 bar (front) and 33 PSI = 2.3 bar (rear). In kPa: 228 kPa front and 228 kPa rear. Multiply PSI × 0.0689 to convert to bar.
Why are the front and rear tire pressures the same on the 2020 Hyundai Tucson?: The 2020 Hyundai Tucson uses equal pressure front and rear (33 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.
What happens if the 2020 Hyundai Tucson tires are underinflated?: Running 5+ PSI low on the Hyundai Tucson causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.
What do the numbers in 235/60R17 mean on the 2020 Hyundai Tucson?: On the 2020 Hyundai Tucson, 235/60R17 breaks down as: 235 = section width in millimetres (9.25"), 60 = aspect ratio (the sidewall is 60% of the width, so 141 mm / 5.55" tall), R = radial construction, and 17 = the wheel diameter in inches.
What is the overall diameter of the 2020 Hyundai Tucson tires?: The 235/60R17 tire on the 2020 Hyundai Tucson has an overall diameter of about 28.1" (714 mm) and a rolling circumference of roughly 88.29", giving about 718 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.