2023 Hyundai Kona Tire Pressure
OEM cold pressure spec — verified for the 2018–2024 generation
Recommended cold pressure (PSI)
Front
33
2.3 bar · 228 kPa
Rear
33
2.3 bar · 228 kPa
Tire size
215/55R17
Curb weight
1,405 kg
Front axle load
60%
Category
crossover
Always verify against the sticker inside your driver's door — different trims, option packages, or a spare tire may have different specifications.
Customize for your load & driving style
Pre-filled with Hyundai Kona specs. Adjust weight or style below.
Recommended COLD pressure
27.3 / 22 PSI
- Front (cold)
- 27.3 PSI(1.88 bar)
- Rear (cold)
- 22 PSI(1.52 bar)
- Front (hot est.)
- 30 PSI
- Rear (hot est.)
- 24.2 PSI
Street setting: balanced for comfort, wear, and fuel economy. Always measure cold.
Other Hyundai Kona years
FAQ — 2023 Hyundai Kona
- What is the recommended tire pressure for a 2023 Hyundai Kona?
- The 2023 Hyundai Kona uses 33 PSI cold on the front axle and 33 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.
- What tire size does the 2023 Hyundai Kona use?
- The standard (base trim) tire size for the 2023 Hyundai Kona is 215/55R17. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.
- How do I convert the 2023 Hyundai Kona tire pressure to bar?
- 33 PSI = 2.3 bar (front) and 33 PSI = 2.3 bar (rear). In kPa: 228 kPa front and 228 kPa rear. Multiply PSI × 0.0689 to convert to bar.
- Why are the front and rear tire pressures the same on the 2023 Hyundai Kona?
- The 2023 Hyundai Kona uses equal pressure front and rear (33 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.
- What happens if the 2023 Hyundai Kona tires are underinflated?
- Running 5+ PSI low on the Hyundai Kona causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.