What is the recommended tire pressure for a 2020 Ford Explorer?

The 2020 Ford Explorer uses 35 PSI cold on the front axle and 35 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.

What tire size does the 2020 Ford Explorer use?

The standard (base trim) tire size for the 2020 Ford Explorer is 255/55R20. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.

How do I convert the 2020 Ford Explorer tire pressure to bar?

35 PSI = 2.4 bar (front) and 35 PSI = 2.4 bar (rear). In kPa: 241 kPa front and 241 kPa rear. Multiply PSI × 0.0689 to convert to bar.

Why are the front and rear tire pressures the same on the 2020 Ford Explorer?

The 2020 Ford Explorer uses equal pressure front and rear (35 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.

What happens if the 2020 Ford Explorer tires are underinflated?

Running 5+ PSI low on the Ford Explorer causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.

What do the numbers in 255/55R20 mean on the 2020 Ford Explorer?

On the 2020 Ford Explorer, 255/55R20 breaks down as: 255 = section width in millimetres (10.04"), 55 = aspect ratio (the sidewall is 55% of the width, so 140.3 mm / 5.52" tall), R = radial construction, and 20 = the wheel diameter in inches.

What is the overall diameter of the 2020 Ford Explorer tires?

The 255/55R20 tire on the 2020 Ford Explorer has an overall diameter of about 31.04" (789 mm) and a rolling circumference of roughly 97.53", giving about 650 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.

2020 Ford Explorer Tire Pressure

OEM cold pressure spec — verified for the 2020–2024 generation.

Recommended cold pressure

Front

35PSI

241 kPa

Rear

35PSI

241 kPa

Tire size

255/55R20

Curb weight

2,050 kg

Front axle

54%

2020 Ford Explorer tire size: 255/55R20

The factory (base-trim) tire size for the 2020 Ford Explorer is 255/55R20. Here is what that size measures out to in the real world — useful when comparing replacement tires or checking whether a different size will fit.

Section width

255 mm

10.04"

Aspect ratio

55%

140.3 mm sidewall

Wheel diameter

20"

rim

Overall diameter: 31.04"; 789 mm
Sidewall height: 5.52"; 140.3 mm
Circumference: 97.53"; rolling
Revs / mile: 650; approx.

Staying within ±3% of the 31.04" overall diameter keeps your speedometer accurate. A larger diameter reads slower than your true speed; a smaller one reads faster.

Custom adjustment

Tune for your load & driving style

Pre-filled with Ford Explorer specs. Adjust weight or style below.

Recommended COLD pressure

22 / 22 PSI

Front (cold): 22 PSI(1.52 bar)
Rear (cold): 22 PSI(1.52 bar)
Front (hot est.): 24.2 PSI
Rear (hot est.): 24.2 PSI

Street setting: balanced for comfort, wear, and fuel economy. Always measure cold.

Save on coverage

Compare insurance quotes for your 2020 Ford Explorer

See rates from multiple insurers side by side for the 2020 Ford Explorer. Most drivers who compare switch and save.

Compare insurance quotes

Your 2020 Ford Explorer is likely out of its factory warranty. See extended warranty options →

Calchy may be compensated when you get a quote through these partners. This is advertising, not financial advice.

Shop parts for this vehicle

Common maintenance parts that fit the 2020 Ford Explorer. Links open an Amazon search.

As an Amazon Associate, Calchy may earn from qualifying purchases.

Other Ford Explorer years

2023 2022 2021 2019 2018 2017 All years →

FAQ

2020 Ford Explorer

What is the recommended tire pressure for a 2020 Ford Explorer?: The 2020 Ford Explorer uses 35 PSI cold on the front axle and 35 PSI cold on the rear axle. These are the OEM specifications. Always measure tire pressure when the tires are cold — before driving or after sitting for at least 3 hours.
What tire size does the 2020 Ford Explorer use?: The standard (base trim) tire size for the 2020 Ford Explorer is 255/55R20. Higher trim levels and optional packages may use a different size — check the sticker inside your driver's door for the exact specification for your vehicle.
How do I convert the 2020 Ford Explorer tire pressure to bar?: 35 PSI = 2.4 bar (front) and 35 PSI = 2.4 bar (rear). In kPa: 241 kPa front and 241 kPa rear. Multiply PSI × 0.0689 to convert to bar.
Why are the front and rear tire pressures the same on the 2020 Ford Explorer?: The 2020 Ford Explorer uses equal pressure front and rear (35 PSI). The vehicle's weight distribution and symmetric tire sizing mean both axles carry similar loads per tire.
What happens if the 2020 Ford Explorer tires are underinflated?: Running 5+ PSI low on the Ford Explorer causes uneven shoulder wear, increased rolling resistance (worse fuel economy), higher tire operating temperature, and reduced wet braking performance. In extreme cases, chronic underinflation can cause sidewall failure. Check pressure monthly and always after a large temperature swing.
What do the numbers in 255/55R20 mean on the 2020 Ford Explorer?: On the 2020 Ford Explorer, 255/55R20 breaks down as: 255 = section width in millimetres (10.04"), 55 = aspect ratio (the sidewall is 55% of the width, so 140.3 mm / 5.52" tall), R = radial construction, and 20 = the wheel diameter in inches.
What is the overall diameter of the 2020 Ford Explorer tires?: The 255/55R20 tire on the 2020 Ford Explorer has an overall diameter of about 31.04" (789 mm) and a rolling circumference of roughly 97.53", giving about 650 revolutions per mile. Fitting a tire with a different diameter will throw off your speedometer and odometer.